DMX
Controller
DMX 512
DMX 512
LED Moving Head 60W Spot ver.12.2021
•
Art No P7100549
•
Power supply: 220V AC, 50-60Hz
•
Power consumption: 80W
•
Light Source: 1pcs. LED 60W
•
PAN range: 5400
•
TILT range: 202
0
•
Angle: 11
0
•
Color wheel - 7 white
5.1 Connecting DMX signal
The connection is performed using cable with
XLR-female -> XLR-Male plugs.
5. CONNECTION
•
Gobo wheel: 7 gobos + white,
•
Zoom: Yes (manual)
•
9/11 DMX channel mode.
•
3-Pin XLR DMX input/output
•
Net Weight: 3kg
•
Weight with packaging: 3,6 kg (carton box)
•
Dimensions: H(30)xW(19,5)xD(14,5) cm
The device is equipped with the following
interfaces:
1. DMX (in/out): XLR 3-pin socket
2. Power (in/out): powerCON socket
1
3
2
2
FEMALE
XLR
GROUND
DMX +
DMX -
MALE
XLR
3
1
CAUTION!
At the last fixture, the DMX signal
has to be terminated with a terminator. Solder
a 120Ω resistor between signal (-) and signal
(+) into a XLR plug and plug it in the DMX
output of the last fixture.
1
FEMALE
XLR
GROUND
DMX +
DMX -
MALE
XLR
2
3
4
5
1
2
3
4
5
The unit should be mounted via its screw
holes on the bracket. Always ensure that
the unit is firmly fixed to avoid vibration
and slipping while operating. Always
ensure that the structure to which you are
attaching the unit is secure and is able to
support a weight of 10 times of the unit’s
4. INSTALLATION
3. PRODUCT INFORMATION
weight. Also always use a safety cable that
can hold 12 times of the weight of the unit
when installing the fixture. The equipment
must be fixed by professionals. And it must
be fixed at a place where is out of the touch
of people and has no one pass by or under
it.