5.2 Voltage specification
5.3 Connecting power supply
6.1 Control panel
Input Voltage
Total Power
Frequency
90~260V
250W
50/60Hz
5.1 Connecting DMX signal
The connection is performed using cable with XLR-female -> XLR-Male plugs.
5. CONNECTION
6. OPERATION MANUAL
The device is equipped with the following
interfaces:
1. DMX (in/out): XLR 3-pin socket
2. Power (in/out): powerCON socket
1
3
2
2
FEMALE
XLR
GROUND
DMX +
DMX -
MALE
XLR
3
1
DMX
Controller
DMX 512
DMX 512
The connection is performed using power
cable with powerCON connector (included).
The device must be operated by qualified
C AU T I O N !
In the case of cable damage do not attempt to repair.
Replacement or repair can be made only on the manufacturer or by
a person with appropriate permissions.
personnel. Make sure that the power grid
supply parameters are consistent with device
parameters and limitations are not exceeded.
The control panel is equipped with LCD
digit display and 5 control buttons with the
following functions:
1.
L E F T
– choose function
2.
D OW N
– change value
3.
U P
– change value
4.
R I G H T
– choose function
5.
O K
– confirm changes
User Manual
•
Instrukcja Obsługi