MEGA FOAM MACHINE
•
Art No F5300002
4. INSTALLATION
3. PRODUCT INFORMATION
Power supply voltage: 110-240V
Power consumption: 3000W
Operation area: height-3m, range-50m
Housing made: Steel
Dimension [cm]: H-64 W-64 D-64
Weight [kg]: 35
Weight with packaging [kg]: 40
Type of packaging: Carton Box
Make sure all necessary cables are properly
connected. Always ensure that the unit is
firmly fixed to avoid vibration and slipping
while operating. Always ensure that the
structure to which you are attaching the
unit is secure and is able to support a weight
of 10 times of the unit’s weight. Also always
use a safety cable that can hold 12 times
of the weight of the unit when installing
the fixture. The equipment must be fixed
by professionals. And it must be fixed at a
place where is out of the touch of people
and has no one pass by or under it.
4.1 Voltage specification
Input Voltage
Total Power
Frequency
110-240V
3000W
50/60Hz
5. OPERATION
1. First, check the switches on the control panel. Make sure they are all turned off.
2. Set the right angle of the device - maximum 45 degrees.
3. Place the pump in a container with foam.
4. Turn on the fan and let it run for about 30 seconds.
5. Turn on the pump. WARNING! Before turning off the pump, the fan should run for
approx. 30 seconds.
6. After finishing work, turn off the device and clean it thoroughly.
