WATERBASE LOW FOG MACHINE
•
Art No F5100347
4. INSTALLATION
3. PRODUCT INFORMATION
Power supply voltage: 110-240V
Power consumption: 3000W
Spray distance: 10m
Smoke output: 18000cu.ff/min
Housing made: Steel
Dimension [cm]: H-55/67 W-87 D-40
Weight with packaging [kg]: 17,2
Type of packaging: Carton Box
Make sure all necessary cables are properly
connected. Always ensure that the unit is
firmly fixed to avoid vibration and slipping
while operating. Always ensure that the
structure to which you are attaching the
unit is secure and is able to support a weight
of 10 times of the unit’s weight. Also always
use a safety cable that can hold 12 times
of the weight of the unit when installing
the fixture. The equipment must be fixed
by professionals. And it must be fixed at a
place where is out of the touch of people
and has no one pass by or under it.
4.1 Voltage specification
Input Voltage
Total Power
Frequency
110-230V
3000W
50/60Hz
5. OPERATION
- UP - Heating
A 1-511 DMX address code
P 1-100 Puff QTY 1-100 adjust
D 1-200 Puff time 1-200 adjust
1 1-200 Space time 1-200 adjust
Standby mode when the digital hose
strokes cycle working
1.Puff: Press up (on/off) work/stop, puff
qty is the maximum when show P100.
2. Puff QTY adjust: Press the menu but
-
ton to show P than press the up or down
button then press the OK button to save
3. Puff time adjust: Press the menu but
-
ton to display D, press the up or down
button to adjust the range of 1-200 se
-
conds, then press the enter button. Such
as D, number eight is mean puff seconds.
4. Space time adjust: Press the menu but
-
ton to display number one and press the
up or down button to adjust the range of
1-200 seconds, then press the OK button
to save. such as, number 5 is the space
five seconds
5. Definite Time Definite Quantity: Press
the down button (Definite Time Definite
Quantity) work / stops. Smoke machine
work automatically cycle according to set
numerical of puff time and space time.
Like three and four options, puff eight
seconds and space five seconds
6.Remote Control: Puff QTY according
to set parameter for work; such as puff
QTY at 8%, puff QTY is P 8 when remote
control
7.DMX: Automatic priority DMX, other
function is disabled when DMX, press
the menu key and press the up/down
button, set address code, press the OK
button to save.
