www.flash-butrym.pl
4
4
INSTALLATION
After removing the packaging, check if the device was not damaged during transport. Before connecting to
the mains, make sure that the device is securely mounted. The manufacturer is not responsible for damage
caused by unstable mounting.
Ensure proper connection to the mains and proper grounding. Make sure that the electrical parameters are
consistent with device requirements. All activities, including connecting the device to the mains must be
performed by qualified personnel.
5
CONNECTIONS
The device is equipped with the following interfaces:
1.
DMX (in/out): XLR 3-pin socket
2.
Power (in): powerCON socket
5.1
Connecting DMX signal
The
connection
is
performed
using
cable
with
XLR-female
->
XLR-Male
plugs.
CAUTION: At the last fixture, the DMX signal has to be terminated with a terminator. Solder a 120
resistor
between signal (-) and signal (+) into a XLR plug and plug it in the DMX output of the last fixture.
5.2
Voltage specification
Input Voltage
Total Power
Frequency
100~240V
340W
50/60Hz
5.3
Connecting power supply
The connection is performed using power cable with PowerCon connector (included).
The device must be operated by qualified personnel. Make sure that the power grid supply parameters are
consistent with device parameters and limitations are not exceeded.