www.flash-butrym.pl
4
5.2
Voltage specification
Input Voltage
Total Power
Frequency
100~245V
400W
50/60Hz
5.3
Connecting power supply
The connection is performed using power cable with PowerCon connector (included).
The device must be operated by qualified personnel. Make sure that the power grid supply parameters are
consistent with device parameters and limitations are not exceeded.
CAUTION!
In the case of cable damage do not attempt to repair. Replacement or repair can be made only
on the manufacturer or by a person with appropriate permissions.
Maximum number of devices connected in series:
4
6
OPERATION MANUAL
6.1
Control panel
The control panel is equipped with LCD display and 4 control buttons with the following functions:
1.
ESC – go back from the selected options, go to upper menu, cancel changes
2.
DOWN – choose option, edit parameter
3.
UP – choose option, edit parameter
4.
ENTER edit selected option, confirm changes
