Setup single-desk light`s autocephaly moving mode(sound control)
.
Press the
MENU
button until it shows
SNOF
.
.
Use the
UP/DOWN
buttons to set to
SNOF
,press
ENTER
to confirm.
Master/slave mode(auto-running
、
、
、
、
sound control)
.
This mode will allow you to link up 32 units together without a controller.
.
Use standard DMX cables to daisy chain your units together via the DMX connector
on the rear of the units.Proper performance it may be necessary to use a terminator
at the last fixture. For more information about terminators..
Set the desired master-
mode- “Automatic program mode” or”sound controlled
mode”, for the master-device, send the DMX address 1 for all slave-devices. Please
refer to the instruction under control board.
To set the pan to reverse
.
Press the
MENU
until it shows
RPOF
.
.
Use the
UP/DOWN
buttons show
RPON
, press
ENTER
to confirm.
To set the tilt to reverse
.
Press the
MENU
until it shows
RTOF
.
Use the
UP/DOWN
buttons show
RTON
, press
ENTER
to confirm.
To set the LED readout to 180
°
,rotating
.
Press the
MENU
until it shows
RDOF.
.
Use the
UP/DOWN
buttons show
RDON
, press
ENTER
to confirm.
Resume reverse Windows default
.
Press the
MENU
until it shows
DFON
.
.
press
ENTER
to confirm
。
DMX mode
This mode allows the unit to be controlled by any universal DMX controller.
The default mode for the fixture is DMX, as follows
4.4 DMX channel values
Channel
Value
Function
1
0-255
Pan
Pan movement
2
0-255
Tilt
Tilt movement
