www.flash-butrym.pl
Page
2
Please use the product before carefully read the product description save product
brochures
Thank you for using the company's production of PAR lamp! This product is applicable to the
dance hall, stage and other.
Accessories of this product contains PAR lights, power line, the use of manuals and warranty
cards.
In order to make you as soon as possible to easily operate your controller, we randomly with a
detailed user manual, you can obtain the relevant product introduction, methods of using such
knowledge. Use your this controller before, please read our random with all the information, so
that you can better use of the product.
In the preparation of this book we very serious and strict, hope you can provide complete and
reliable information, however inevitable errors and omissions, please give understanding and
sincerely welcome your criticism and correction. If you are in the process of using the product
found any problems, please call our service hotline, thank you for your support and cooperation!
The production of standard:
IEC60598-1: 2003
IEC6098-2-17: 1984+A2: 1990
Important notice
★
If you will not use this product, be sure to store it at room temperature environment, so as not
to components due to environmental damage caused by dry or wet
★
Do not hot, cold, dusty or humid environments use this product. Please control the ambient
temperature should not exceed 35
℃
.
★
Do not use this product has been dropped, or the impact of friction with hard objects, otherwise
it may cause the product casing surface wear flowers, and other hardware damage.
★
avoid dry environment in particular, apply this product to prevent static electricity.
★
installing or moving the product, protect the head of the lens to avoid scratches or damage,
affect the lighting effects.
★
avoid splashing water droplets on the machine.
★
using this product, please do not close look into the lamp, so as not to affect your eye vision
temporarily.
Function:
• Support for auto-run feature
• Supports voice-activated mode function
• Support for DMX512 control
DMX512 Control Data Connection:
This product provides a standard DMX512 interface - three core Caron Block, Caron seat were
numbered label, numbered "1" core for the signal, the number "2" core for the signal "-", "3" for
the signal "+."
Use, as long as the standard DMX512 control directly to the station's output cable into the input-
Caron seat, press the dial codes specified address, then enter the DMX512 console control
mode.
Should pay attention to light and the light line between the input-output type Caron seat and seat-
one correspondence, correspondence as shown
