Page 4 of 4
MAINTENANCE
Before any maintenance/cleaning is undertaken, always disconnect the fire from the mains power supply.
Replacing Lamps (Dimmable 240V 7W 3000k E14 LED lamps): Replacements are available from Flamerite Fires
Allow a suitable time for the lamps to cool then remove the glass & fuel effect (see Installation). Remove the two screws from either side of the
fuel bed and lift out of place. Remove and replace the lamps, fuel bed, fuel effect and glass. Please note that replacement Lamps are only covered
from purchase by a 2 year warranty
Cleaning
The fire can be cleaned with a soft damp cloth and none abrasive glass cleaner.
WARNINGS
•
Do not open and close the glass repeatedly while the heater is on or the cut out will activate.
•
Do not use the fire in the vicinity of a bath shower or swimming pool.
•
Never use the fire to dry laundry.
•
Never install the fire directly underneath a fixed main socket.
•
Never cover the appliance during the operation of the fire.
•
The use of an extension lead is not recommended.
•
Particular caution should be applied to ensure that children do not play with the fuel effects.
•
As with any electrical appliance whilst the instructions aim to cover as many eventualities as possible, caution and common sense should
be applied when operating your appliance, particularly in the vicinity of small children.
Areas around the fire will become hot when activated. We strongly recommend small children be kept away from having any direct
contact with the appliance by means of fitting a fireguard. This appliance is not intended for use by persons (or children) with reduced
physical sensory or mental capabilities or lack of experience or knowledge unless they have been given supervision or instruction
concerning the use of the appliance by the person responsible for their safety. Children should be supervised to ensure they do not
play with this appliance.
PROBLEM SOLVING
•
No power to the fire: Check the wall socket, plug, fuse and lamps.
•
No illumination: Make sure fire is turned on. Check heater is working, if so check lamps.
•
Illumination but heater blowing cold: The safety cut out may have operated. Check for obstruction around the heater. If installed into a
chimney or cavity wall is 100% of drawn air blocked off from the fire.
•
Noise when illuminated: Due to moving parts, the electric fire will make a noise.
•
Noise from the heater when in use: The sound of rushing air is normal.
RECYCLING
Please recycle responsibly. Take your item to your local recycling centre – you can easily locate your nearest centre on the
website or
check with your retailer for details on either a collection service or a store take-back scheme (some may apply charges). Councils may offer a
household recycling collection service for small electrical items; contact your local authority for more details.
Model identifier (s)
Gotham
900
Item
Symbol
Value
Unit
Heat output
Nominal heat output
Pnom
1.5
kW
Minimum heat output (indicative)
Pmin
0.75
kW
Maximum continuous heat output
Pmax,c
1.5
kW
Auxiliary electricity consumption
At nominal heat
elmax
0.24
kW
At minimum heat
elmin
0.24
kW
In standby
elSB
0.0015
kW
Type of heat output/room temperature control
With electronic room temperature control plus week timer
Yes
Contact details:
Flamerite Fires Ltd. Greenhough Road, Lichfield. Staffs.
WS13 7AU e: [email protected] t: 01543251122
