2. Introduction/ Installation
2.1 Hardware
We start with the hardware equipment:
On the front side you find :
❶
a backlit LCD with 3 rows
❷
a data entry knob with key button function
❸
plus the backlit 6x9 pushbutton-matrix.
On the back you find the circuit points for:
❶
USB 2.0 (for loading new firmware / updates)
❷
MIDI-IN
❸
MIDI-OUT
❹
the jack for the wall wart (12VDC/800mA)
❺
the LOAD switch for loading new firmware via USB
❻
plus the contactor.
2.2 Start the MIDI Phrase Sequencer
Now we activate the MIDI-PHRASE-SEQUENCER.
Switch on the device.
While booting you can hold the key button below right
to call the menu for the initialization menu
(please use only after firmware updates).
➜
Advise!
This function clear all individual data and all user patterns!
Please plug in the supplied wall wart and connect the MIDI-OUT of the SIX-IN-A-ROW with
the MIDI-IN of the sound generator you want to play.
➜
Advise!
Before switching on please make sure that the LOAD-switch is switched off and pointing
inwards.
❶
❶
❸
❸
❷
❷
❹
❺
❻
4
