StEp 1 – Attach Poles A, B, C, D to Platform F1
sTeP 1a – attach poles a and B to Platform f1
Attach Poles A to any corner on Platform F by inserting (1)
Bolt Z, (2) Washer HH and (1) Nut AA, into the bottom
Platform Ring (32” high). Repeat to attach Pole B to Platform
F on the corner to the right (when standing at Pole A). Do
not tighten bolts.
sTeP 1B – attach poles c and d to Platform f1
Have two people hold poles A and B upright as you lift the
platform F from the opposite side to Attach Pole C and D.
Attach Pole C to the corner that is to the left of Pole A (when
standing at Pole A) by positioning and inserting (1) Bolt Z,
(2) Washer HH and (1) Nut AA into
Platform Ring (32”
high)
on Pole C to attach it to Platform F. Have a person hold
Pole C while attaching the last open corner of Platform F to
Pole D on the Platform Ring
(32” High)
with (1) Bolt Z, (2)
Washer HH and (1) Nut AA.
imPorTaNT!
Step 1 requires 4 people
A person must hold each pole upright until the nuts are
tightened to prevent buckling and bending of the poles
while the bolts are loose.
After all four posts are attached, tighten the bolts to
stabilize the structure before moving on to step 2.
pArtS
Posts A, B, C, D,
(1) Platform F,
(4) Bolt Z,
(4) Nut AA,
(8) Washer HH
* It doesn’t matter which
Platform F you use first.
From here forward, the one
you choose will be referred
to as Platform F1
sTeP 1a
sTEP1A
d
c
a
B
f1
32”
32”
32”
32”
