Assembly and installation
9
Fläkt Woods
8877 GB 2017.10.25
Specifications are subject to change without further notice
TWIN WHEEL SYSTEM
u
Start page
...................................................................................
First menu at start up. Shows operational mode and actual values for temperatures
u
Password enter
...........................................................
Password is: 1000
u
Main Index
..........................................................................
The main index
u
Unit
........................................................................................
Status of settings for Twin Wheel
u
Main overview
...................................................
All actual and set point values and control signal status
u
Inputs
...........................................................................
Status: Analogue and digital inputs. Alarm status
u
Outputs
......................................................................
Status: Analogue and digital outputs
u
Operating mode
..............................................
Operational information
u
Actual
....................................................................
Current operating mode
u
Manual operation
....................................
Operating mode from mode switcher
u
From BMS
........................................................
Operating mode from BMS
u
Setpoints/Settings
.....................................
Set points for temperature and humidity control
u
Temp control
.......................................................
Control of the heating/cooling sequence
u
Tmp setpoints
.............................................
Set points and dead zones for temperature control
u
Heat recovery
..............................................
Status and settings for the hygroscopic rotor
u
Heat recovery 2
........................................
Status and settings for the sensible rotor
u
Extra htg demand
...................................
Status and settings for external heating
u
Cooling
.................................................................
Status and settings for cooling
u
Humidity control
.............................................
Control of the dehumidification sequence
u
Setpoints
...........................................................
Set points for the dehumidification controller
u
Dehumidification
.....................................
Status and settings for dehumidification
u
Auxiliary
...................................................................
Status and settings for operating indication
u
Loop controllers
..............................................
Status and settings for the current controllers
u
Operating hours
..............................................
Measured operating time for cooling and external heating
u
Global functions
....................................................
Global functions
u
Su/Wi calculation
........................................
Settings for summer and winter mode
u
Alarm handling
......................................................
Alarm acknowledgement and alarm outputs
u
System overview
.................................................
Time, language, software information, save/restore settings, communication
u
All system settings
.....................................
HMI, password handling, diagnose
u
Overview I/O config/raw values
......
Overview of activated I/O’s and their raw values
u
Configuration
............................................................
HMI Configuration
u
Configuration 1
..................................................
Overall functions, accessories, sensors
u
Configuration 2
.................................................
Choice of functions and accessories
u
Configuration
......................................................
IO’s allocation of physical inputs and outputs
Menu heading
Remark
