Installation and maintenance
4
Fläkt Woods
9325 GB 2016.09.16
Specifications are subject to change without further notice
Frequency converter Fc102 (quick guide)
control unit (lcp)
a. alphanumeric display
The information displayed in the control unit display (LCP) can
be customised. See parameters 0–20, 0–21, 0–22, 0–23 and
0–24. The factory settings display: motor rpm, motor current,
motor output, motor frequency and reference.
B. menu buttons
Use the menu buttons to access the parameter settings, to
toggle between status display modes during normal operation
and to display fault log data.
c. navigation and indication
[Back] returns to the previous step or menu list [Cancel]
Cancel the latest change or command [Info] Provides informa-
tion of the function displayed [
▲
] [
▼
] [
▲
] [
▼
] navigate and
increase/decrease [OK] Activate selection or access a
parameter group
• Green indication – power on
• Yellow indication – warning
• Red indication – alarm
d. driftslägesknappar och återställning
[Hand/on] – Starting the motor for local control
[Off] – Stopping the motor
[Auto/on] – Allow control via control terminals or the commu-
nication bus
[Reset] – Resetting alarms
manual operation
• Press [Hand/on] to start
• Press the navigation buttons to set the desired speed
• Press [Off] to stop
• Press [Auto/on] to return to automatic operation
reverse the direction oF rotation
If necessary the direction of rotation can be reversed using
parameter 1–06. When connection is correct 0=clockwise and
1=anti-clockwise.
more inFormation
This quick guide contains the basic information needed to
install and operate the frequency converter.
There is more information available in the attached docu-
mentation.
Auto
on
Reset
Hand
on
Off
Status
Quick
Menu
Main
Menu
Alarm
Log
Canc
el
Inf
o
Status
1(1)
1234rpm
Back
OK
43,5Hz
Run OK
43,5Hz
On
Alarm
Warn.
130BC362.10
a
b
c
d
1.0 A
a
b
c
d
