flakt woods STRA-04 Installation & Maintenance Manual Download Page 1 | Manualshive

Page: 1 / 12

flakt woods STRA-04 Installation & Maintenance Manual Download Page 1

STRA-04 Room controller. Installation and maintenance manual.

Fläkt Woods

8790 GB 2016.03

1

Specifications are subject of alteration without further notice.

Contents STRA-04 for Optivent

Installation instructions........................................................................2
Controller................................................................................................3
Display handling...................................................................................3
Technical data........................................................................................4
Configuration........................................................................................4
Operating modes..................................................................................6
Control...................................................................................................7
Condensation detector/Window contact/Frost protection.............8
Parameter settings................................................................................9
Function key........................................................................................11

1
2
3
...
»

Summary of Contents for STRA-04













Reviews:

No comments