Fläkt Woods
9191 GB 2015.09.24
Specifications are subject to alteration without notice
Fläkt Woods
9191 GB 2015.09.24
Specifications are subject to alteration without notice
AIR TREATMENT
9191 GB 2015.09.29
AIR COMFORT
flÄkt woods pm-motor
WITH SUPPLIED FC 102 FREQUENCY CONVERTER
» INSTALLATION AND MAINTENANCE INSTRUCTIONS
installation
warning!
The motor is designed exclusively for
operation with the supplied speed control
(frequency converter).
Direct on-line connection to the mains is not
possible for PM-motors.
warning!
Risk of electric shock:
Motor terminals may still be live if the impeller
is rotating, even when the main incoming
supplied has been isolated.
Ensure the impeller is kept stationary before
opening and whilst the terminal box is open.
general
• Admissible environmental temperature: from -15 °C up to
+40 °C, with altitudes 1000 m above sea level
• Mounting: IM B3, B5
• Drive operating voltage: 400 VAC
• Insulation class: "F"; temperature rise to class B
(TEFC execution)
• IP55 degree of protection for the whole range
• Reduced dimensions
• Rare earth permanent magnets
Speed controller and motor shall be installed by a qualified
electrician with adequate knowledge how to install speed-
controlled drive systems (frequency inverters) and EMC safety.
All cabling must comply with national and local regulations on
cable cross-sections and ambient temperature.
