background image

 

 

The FISHTRON RX MINI Remote Listening Receiver  

Instructions for operation and use (last updated on 13 Oct 2017) 

 

Thank you for purchasing the FISHTRON RX MINI remote listening receiver.  

We hope you’ll be satisfied. 

 

 

The  new  miniature  remote  listening  receiver, 
capable  of  receiving  up  to  nine  devices;  a  bite  is 
signalled  acoustically  and  optically  on  a  LED 
display. It not only works with the FISHTRON NEON 
TX3,  FISHTRON  Q9-RGB  TX  and  FISHTRON 

CatFish TX3 bite alarms, but also detects an alarm 
from  the  FISHTRON  ALF3  wireless  sensors  and 
can  connect  other  FLAJZAR  accessories.  Simple, 
miniature, easily carried and with a long battery life. 

 
 

Description of the FISHTRON RX MINI 

The nine-channel FISHTRON RX MINI receiver is designed for a wireless fish bite or alarm evaluation. All nine 
channels can be used to save either bite alarms or alarms. The kit’s range, i.e. a transmitter from the receiver, 
is up to several hundred metres in free space. The receiver can be paired with a FLAJZAR bite alarms, such 
as FISHTRON NEON TX3, FISHTRON Q9-RGB TX or FISHTRON CatFish TX3 or FISHTRON ALF3 alarm 
sensor. 
 
The receiver is switched on with a sliding switch which is located on the left side. After turning it on, the LED flashes 
briefly and a short tone is heard. 
 
The PLUS and MINUS buttons are located on the front side and are used for sound signalling volume control 
in normal mode. They also activate the learn mode. 

 
The FISHTRON RX MINI functions during a bite 

 

A compatible bite alarm signals the bite by sending encoded information to the receiver. The receiver first 

verifies whether the bite alarms which is transmitting is stored in its memory – this will prevent the other 
fisherman from interfering with the kit. 

 

If  the signal  from the detector  is  evaluated  as valid,  the sound signalling  the  bite  will  be  heard  on the 
receiver  (the  pitch  of  the  tone  corresponds  to  the  pitch  of  the  tone  set  on  the  bite  alarm)  and  the 

corresponding number of the channel which the bite is on or which sent the signal that lights up on the 
LED display. 

 

The channel number  is still  displayed  20 seconds  after the  bite  on  the  LED  display,  then  the red  LED 
flashes for 60 seconds at the top of the receiver (memory) and the number of the channel with the bite 

comes on after briefly pressing any button. 

Reviews: