Technical parameters of FISHTRON e3TX bite alarm
•
Dimensions: height without screw 85 mm, width max. 47 mm, depth 37 mm, screw length 20 mm
• Power supply: 2 x 1.5V (2 alkaline batteries: LR1 LADY)
• Power consumption: off state: 0.00 mA, on - quiet: 15 uA (microA), on – catch reports: max. 150 mA dia. impulsively
• Connector for connecting LED swinger: JACK 2.5 mm mono, center wire +, voltage max. 3V, load max. 5 mA
• Operating temperatures: -20ºC to + 40ºC
Battery replacement
Even if the alarm is designed with minimal consumption, which results in a long battery life, one day the batteries will
have to be replaced.
The weak battery power will be reflected by reduced LED brightness, reduced volume, and a self-timer (automatic
internal CPU protection). More noticeably you will be aware of the battery reduction in the blue LED’s, which are very
popular, but their disadvantage is the need for a higher voltage, so when the battery is dying, it decreases before the
other colors.
Two LR1 LADY power items are located under the back cover of the bite alarm, which can be ejected without pointing
the device downward.
When inserting new batteries, be sure to look at the correct direction. When the battery is
polarized, the alarm will not work and may be damaged.
After replacing the batteries, slide the rear cover back into
the lock.
WARNING There is a threat of danger when replacing the battery with the wrong type!
How to attain the maximum range of the kit
The range of the kit, alarm-receiver, is in an open space of several hundred meters, on flat surfaces up to 500 m. Any
terrain inequality, shore, slope, buildings, automobiles or other obstacles limit the range. If the current conditions and
fishing method allow it, the signaling device should be located at least 0.5 meters above ground (if you have a
requirement for extreme range). Take the receiver with you and keep it in a top pocket if you want to reach the maximum
range, or use the neck strap (threaded under the stainless steel rod at the top of the receiver). Do not place the receiver
or transmitter on metal objects. The transmitter and the receiver should have the antennae up. Despite the large range of
the kit, we encourage you to comply with Fishing Regulations and not leave the fishing area for a distance greater than
that permitted by the Fishing Regulations. Always verify the range at the location after installing the bite alarm.
Declaration of Conformity
The device complies with EU directives and is issued with a Declaration of Conformity.
Post-warranty service
The post-warranty service is performed exclusively by the Czech manufacturer - FLAJZAR, s.r.o. We try our best to help
you solve every problem in the shortest possible time.
Quick email contact in case of problems:
Recycling
Information for users for disposal of electrical and electronic equipment. The symbol on the
product on its packaging or in the accompanying documentation means that used electrical or
electronic products must not be disposed of along with municipal waste. With the purpose of
properly disposing of the product, take it to designated collection points where it will be accepted free of charge.
Battery
Do not dispose of batteries in fire, do not disassemble, short circuit. Do not recharge the battery.
Manufacturer/Service/Technical Support
FLAJZAR, s.r.o.
Lidéřovice 151
696 61 Vnorovy
mobile phone: + 420 776 586 866
e-mail:
Summary of Contents for FISHTRON e3TX
Page 3: ...PHS ...
