EN 4
receive a welcome SMS, your phone number has been
stored in the EMA2.
Teach the EMA2 your authorisation pendant, or other
accessories:
Briefl y press the button, the green light alternates with
the blue – the EMA2 is in learning mode. Using a paper
clip, briefl y press the authorisation pendant’s learning
button, both LEDs will fl ash after learning is successful.
From now on, the EMA2 is set to factory default. Other
settings can be made at any time by connecting to a PC
and the EMA2Confi g confi guration programme.
Note:
Insert the newly purchased SIM card into your mobile
phone and disable the PIN code. To activate and validate a
new card, we recommend that you to make the fi rst outgoing
call and send an SMS – therefore, the SIM card will be activat-
ed in the operator’s network.
Note:
We recommend that you to turn off the voice mailbox
on the SIM card of the EMA2 alarm as well as the welcome
melody or other operator messages. This setting needs to be
carried out on the mobile phone with the SIM card inserted
from the EMA2 alarm.
Note:
The EMA2 contains an integrated Li-Ion battery that
can discharge when it hasn’t been used for a long time.
Therefore, we recommend charging the EMA2 alarm prior to
its fi rst use. Full charge takes approximately 3 hours. Insert
the EMA2 into the 12V board connector or connect to a PC
with a USB cable.
