5. Attach Faceplate
Attach the faceplate with the two screws and
you are all finished. Install any other vents and
move over to the digital setup via the Flair App
or
my.flair.co
.
6. Digital Installation
For initial setup of your Flair System, be sure to
refer to the Puck Installation Guide. Once you
are ready to associate the vent with a room, the
light bar should show a unique code.
If you don’t see any lights on your vent’s light bar or if you are
adding this vent to an already configured system
, go to
Home Settings → Flair Devices
and enable
Setup Mode
.
Wired Installation
24VAC Optional Power Port
Use with: 20AWG Plenum Rated Solid 2 Conductor Wire
@24VAC: less than 1mA continuous, max 50mA Intermittent
3
