Controller Calibration
The two extinguisher tracking controllers are pre-calibrated. There is no user need
to calibrate. If you find either of the controllers has drifted, and you cannot see the
controller from inside the headset, point the controller horizontally to the front of
your field of view, and press and hold the HOME key for more than one second to
re-center the controller.Reset with VR headset (trainee)
Screen Recentering
Wear the VR Headset and hold the ‘HOME’ button of the controller for more than 1
second to re-center the screen.
Shutdown
Hold down the power button on the VR headset for 5 seconds. A pop-up menu will
allow you to select shutdown or restart with the controller. Click away to cancel.
Volume
To adjust the volume use the controls on the bottom left-hand side of the VR
headset.
Charging the VR Headset
Plug the supplied charger cable into the USB C port on the top of the headset and
the USB end into the supplied wall plug.
Additional information available at
www.pico-interactive.com/us/faqs/FAQ_Neo2
Set-up troubleshooting
8
