FLACARP SENS Instructions For Use Download Page 2

CZ2

EU declaration of conformity:

TFE elektronika s.r.o.

namesti Svobody 1509

696 81 Bzenec, CZ

+420 731 115 151

[email protected]

www.flacarp.com

Manufacturer and service:

Low battery indication:

Customer support:

Battery replacement:

Notice:

Warranty:

If the LED flashes red during switching 

on (20-second countdown), the 

battery is low and must be replaced 

soon(max. several hours remaining).

Do you have any wishes or comments 

about the product? Please email us at 

[email protected]

 and help us continue 

to improve our products. Thank you.

Unscrew two screws on the back of 

the device, remove the back cover 

and slide the CR2450 battery from the 

holder.

The correct polarity must comply 

when inserting a new battery! The 

plus pole of the battery is at the top 

(marked on the holder and battery).

The FLACARP SENS sensor was cre-

ated based on the requirements of 

anglers and aims to contribute to the 

protection of property. However, it is 

only  an  accessory,  not  a  full-fledged 

security device. The manufacturer ac-

cepts no liability for theft or damage to 

the guarded object.

The sensor is not waterproof. Protect 

it from rain and immersion.

The warranty is provided for 24 

months. The warranty does not cover 

mechanical damage and damage 

caused by use contrary to these 

instructions.

of a radio device with the European Directive RED 2014/53/EU, establishing technical 

requirement for radio equipment, and the Governmental Decree No. 481/2012 Col., which 

is harmonized with Directive 2011/65/EU, about the use of some dangerous substances in 

electrical and electronical devices.

Manufacturer: 

TFE elektronika s.r.o., namesti Svobody 1509, 696 81 Bzenec, Czech Republic

declares that the product

 

Sort of equipment:

 Position change detector with integrated transmitter

 Type:

 FLACARP SENS

 

Frequency: 

868,32 MHz

 

Transmitting power:

 max. 14dBm

 

Modulation:

 GFSK

 

Purpose of use:

 Monitored object’s position change assessing 

It complies with the requirements of following standards and regulations, relevant for the 

specified sort of equipment:

 

Radio parameters:

 

ETSI 300-220

 

 

 

ČSN ETSI EN 301 489-1 v.2.1.1:2017

 

EMC:

 

 

ČSN EN 55032 ed.2:2017 + A1:2021

 

 

 

ČSN EN 55024, ČSN EN 61000-4-2, ČSN EN 61000-4-3

 

Safety: 

 

 

ČSN EN 62368-1:2015 + Opr.1:2016 + A11:2017

and it is safe, if used under conditions of common application and in accordance with 

operating instructions.

The Declaration has been issued under the sole responsibility of the producer.

EU Prohlášení o shodě

rádiového zařízení s ustanovením Evropské směrnice RED 2014/53/EU, kterým se 

stanoví technické požadavky na rádiová zařízení a nařízení vlády č. 481/2012 Sb. , které

je v souladu s direk�vou 2011/65/EU o omezení používání některých nebezpečných látek 

v elektrických a elektronických zařízeních.

Výrobce: TFE elektronika s.r.o., nám. Svobody 1509, 696 81 Bzenec, Česká republika

�mto prohlašuje, že výrobek

Druh zařízení:  

Typové označení:  

Kmitočet: 

Vysílací výkon: 

Druh modulace: 

�čel použi�: 

Splňuje požadavky těchto norem a předpisů, příslušných pro daný druh zařízení:

Rádiové parametry: 

EMC:

Bezpečnost:

ETSI 300-220

ČSN ETSI EN 301 489-1 v.2.1.1:2017

ČSN EN 55032 ed.2:2017 +  A1:2021

ČSN EN 55024, ČSN EN 61000-4-2, ČSN 61000-4-3

ČSN EN 62368-1:2015 + Opr.1:2016 +A11:2017

a že je bezpečný za pomínek obvyklého použi� a v souladu s návodem k obsluze.

Detektor změny polohy s integrovaným vysílačem

FLACARP SENS

868,32 MHz

max. 14 dBm

GFSK

Vyhodnocení změny polohy hlídaného předmětu

Toto prohlášení je vydáno na výhradní odpovědnost výrobce.

Bzenec,

1.5.2022 

Tomáš Flajzar ,  jednatel

+420 731 115 151                       [email protected]                       flacarp.com                       flacarp                       flacarp                       tfe.cz

M i c r o - a l a r m   -

  F L A C A R P   S E N S

INSTRUCTIONS FOR USE

P 2

Reviews: