FKI Unitoaster UT 280, Instructions For Use Manual

Page: 7 / 25

7
Transport/installation/fixation
Transport
The Appliance is delivered secured to a transport pallet and should only be transported in the same way if
moved.
WARNING: Do not move the Appliance during operation.
Moving and setting up the Appliance must be performed by two or more peo-
ple!
RISK of injury!
Wear protective gloves and safety footwear during unpacking and installation.
Cut hazard.
Installation
Place the Appliance on a suitable table top or similar at an appropriate working height. The Appliance is op-
erated from the front. The Appliance has adjustable legs and is intended for placement on a table or coun-
ter.
Connection of the Appliance should be carried out by an authorised electrician. The Appli-
ance is equipped with a grounded 1-pole plug (L+N+G). Make sure that the installation has
been carried out correctly with a sufficient fuse size, protection against fault current and
grounding.
WARNING: The Appliance must be earthed in accordance with national safety standards for elec-
trical equipment as failure to do so can cause electric shock and serious injury.
The Appliance must be acclimatised to ambient temperature before use. It should therefore not
be started up until eight hours have elapsed.
The power supply must be able to be disconnected, either by unplugging or by means of a freely
accessible multi-pole switch located before the power outlet in accordance with applicable elec-
tricity regulations. The Appliance must be grounded in accordance with national safety standards
for electrical appliances.
Do not use extension cords or multi-socket outlets. After installation is completed there must be
no direct access to the electrical components. Never touch the Appliance if you are wet or have
bare feet. Do not use this Appliance if the power cord or plug is damaged, if the Appliance is not
working properly, if it is damaged or if it has been dropped on the floor.