FKI SDF-22, Instructions For Use Manual

Page: 13 / 37

12
Start-up
Operation
Minimum set point is 100°C
Maximum set point is 180°C
New appliance starts at 100°C but saves the set point setting when power is cut.
When "+" is pressed, the set point will increase by 5°C. Similarly, when "-" is pressed, the set point will de-
crease by 5°C. However, you cannot go higher or lower than the minimum and maximum set point.
When "standby" is pressed, marked with a standby symbol the fryer will turn off the heat.
When "ECO" is pressed, marked with the machine will change the temperature to 100 °C until "ECO" is
pressed again, after which the machine will go back to the desired set point (it takes approx. 7 min from
100°C to 175°C in a fryer with 9 kW).
The display shows the set point, but if you want the current temperature, you can press "+" and "-" at the
same time, after which the current temperature will be displayed for five seconds.
The display flashes until the desired set point is reached.
Breaker
switch
Handle for ball valve (Draining)
Horizontal pos. = closed
Vertical pos. = open
The picture shows floor models, on
table models the handle must be
tilted out towards the user. (Open
state)
Display