FKI GL 10R 102, Instructions For Use Manual

Page: 9 / 30

10
Installation
Place the appliance on a suitable table top or similar at an appropriate working height. The appliance is op-
erated from the front. The appliance has adjustable legs and is intended for placement on a table or coun-
ter.
Connection of the appliance should be carried out by an authorised electrician. The Roller
Grill is equipped with a grounded 1-pole plug (F+N+J). Make sure that the installation has
been carried out correctly with a sufficient fuse size, protection against fault current and
grounding.
WARNING: The appliance must be earthed in accordance with national safety standards for elec-
trical equipment as failure to do so can cause electric shock and serious injury.
The Roller Grill must be acclimatised before use. It should not therefore be started up until eight
hours have elapsed.
The power supply must be able to be disconnected, either by unplugging or by means of a freely-
accessible multi-pole switch located before the power outlet in accordance with applicable elec-
tricity regulations. The appliance must be earthed in accordance with national safety standards
for electrical appliances.
Do not use extension cords or multi-socket outlets. After installation is completed there must be
no direct access to the electrical components. Never touch the appliance if you are wet or have
bare feet. Do not use this appliance if the power cord or plug is damaged, if the appliance is not
working properly, if it is damaged or if it has been dropped on the floor.
Any replacement of the power cord must be performed by an authorised technician to avoid the
risk of personal injury - RISK of electric shock. Only use oil-resistant cables!
Fixation
The appliance does not need to be secured. It is equipped with adjustable legs to ensure stable
and easy installation.