FKI GL 10040, Instructions For Use Manual

Page: 9 / 17

9
Servicing
The Appliance must always be switched off and disconnected from the power source before com-
mencing repairs.
Repairs to the Appliance must only be performed by authorised personnel.
3 Operation
Before first use
Before start-up, remove all packaging and protective plastic from the Appliance and dispose of it
in accordance with currently applicable regulations
(see section 5.1) . Carefully read the section2
about safety before connecting the Appliance.
Before start-up, clean the Appliance as shown in section2.6.
Operation
The Appliance has two or three heat zones – right/left and middle, or front and rear. These are controlled
by a thermostat, which is switched on by turning the adjustment knob and setting the desired temperature
on the scale next to the indicator on the front. Check the temperature of the grill surface with a thermome-
ter after about 30 minutes and adjust up or down until at the desired temperature.
The yellow glow lamp next to the temperature adjuster will light up while heating up and when the heating
elements are active.
Turn off the Appliance by rotating the temperature selector knobs to zero.