12
3.1.4
ATR Operation Mode (Adaptive Torque Reverse mode)
In this mode, the motor handpiece rotates in clockwise direction and generates reciprocating
motion when the torque load on the file is higher than the set torque limit.
3.2
Apex locator Operation mode
3.2.1
EAL Operation Mode (Electronic Apex Locator)
This mode is intended for working length determination only.
In this mode, the motor handpiece does not run
.
3.3
Combined Motor and Apex locator Operation mode
When a file is inside the canal and the lip hook is in contact with patient’s lip, the device enters
automatically in the combined Motor and Apex locator mode.
