Manual
Auto-Darkening Welding Helmet
Cleaning and Storing
Keep the sensors, solar cell and filter lens clean. Clean filter cartridge and helmet shell by using a
soapy water solution and soft cloth. Do not use solvents or abrasive cleaning detergent. Switch the
product to Grind Mode and put it in a clean, dry location for storage.
Trouble shooting:
PROBLEM(S)
POSSIBLE CAUSE(S)
SUGGESTED SOLUTION(S)
Difficult to see through
filter
Cover lens dirty
Clean or replace cover lens
Filter lens dirty
Clean filter lens
Filter does not darken
when arc is struck
Grind Mode Selected
Adjust Shade from 9 to 13
Cutting Mode Selected
Adjust Shade from 5 to 9
Sensors or Solar Panel blocked
Make sure sensors or solar panel
are exposed to weld arc without
blocking
Set Sensitivity to LOW
Adjust Sensitivity to required level
Low voltage of lithium batteries
Replace with new lithium batteries
if indicator turns red
Filter darkens without
arc
Set Sensitivity to HIGH
Adjust Sensitivity to required level
Filter remains dark after
welding
Set Delay to MAX
Adjust Delay to required level
