17
4.3
Connecting the single parts
Risk of injury by tripping and falling
>>
Place, transport and install product, parts and acceo
-
ries in a safe way.
Tab. 11: Connecting the single parts
1.
Plug the LED Magnifying lamp onto
the
table
clamp.
When adjusting the LED Magnifying lamp,
always make sure that the connection to the
table clamp is only plugged.
Fig. 16: Connecting the single parts - putting on
2.
Adjust the locking screw at the
upper side of the LED magnifying
lamp
as
needed.
Fig. 17: Connecting the single parts - adjusting
4.4 Connecting
Risk of life by electric shock
>>
>>
Avoid contact with mains voltages!
Only use in dry ambience!
Fig. 18: Connecting
Connect the LED Magnifying lamp to a
mains socket.
Fig. 19: Connecting
End of installing. To remove, proceed in reversed order.
