background image

 

Installation Instructions 

  

  

 

  

  

 

 

 

 

 

  

  

 

  

  

 

  

 

BEFORE YOU BEGIN 

CAUTION: 

  

Read these instructions completely and 
carefully. 

 

 

COOKTOPS SHOULD BE INSTALLED IN 
CONJUNCTION WITH A SUITABLE 
OVERHEAD 

  

  

 

VENT HOOD. Due to the high heat capacity of this unit, 

• 

IMPORTANT

 

-

 

Save these instructions for local

 

 

particular attention should be paid to the hood and duct 

inspector's use. 

 

work installation to assure it meets local building codes. 

  

  

 

  

  

• 

IMPORTANT

 

Observe all governing codes and

 

 

Standard cooktop installations: 

ordinances.  

A 1200 CFM hood is recommended for 48" cooktops. 

  

  

 

A 600 CFM hood is recommended for 36" cooktops. 

• 

Note to Installer

 - 

Be sure to leave these instructions

 

 

  

  

with the Consumer. 

 

Hoods should be 24" min. deep and at least the same width 

  

  

 

as the cooktop. 

• 

Note to Consumer

 - 

Keep these instructions for future

 

 

  

  

reference. 

 

Check local building codes for the proper method of gas 

  

  

 

cooktop installation. Local codes vary. Installation, electrical 

• 

FiveStar recommends this product be installed by a

 

 

connections and grounding must comply with applicable 

licensed professional. 

 

codes. In the absence of local codes, the gas cooktop should 

  

  

 

be installed in accordance with the National Fuel Gas Code 

• 

Product failure due to improper installation is not

 

 

ANSI 223.1, latest edition and National Electrical Code 

covered under the Warranty. 

 

ANSI/NFPA 70, latest edition 

  

  

 

 

  

 

  

 

  

 

WARNING: 

 

  

CAUTION: 

  

This appliance must be properly grounded. 

 

 

Cooktops weigh up to 170 pounds. Some 

  

  

 

disassembly will reduce the weight considerably. Due to 

In the Commonwealth of Massachusetts: 

 

the weight and size of the cooktop and to reduce the risk of 

• 

This product must be installed by a licensed plumber

 

 

personal injury or damage to the product and/or damage 

or gas fitter. 

 

to the floor, TWO PEOPLE ARE REQUIRED FOR PROPER 

  

  

 

INSTALLATION. 

• 

When using ball type gas shut-off valves, they shall

 

 

 

  

be T handle type. 

 

  

  

  

  

 

  

  

• 

A flexible gas connector, when used, must not

 

 

 

 

exceed 3 feet. 

 

 

 

  

  

 

 

 

 

 

 

 

 

 

Summary of Contents for TN048-7 Series









Reviews: