FiveO DF12A, Owner'S Manual

Page: 12 / 20

Subwoofer Back Panel Description
(1) Input 1 Volume Control
(2) Input 2 Volume Control
(3) LINE / MIC Switch (Input1 only)
(4) XLR AND 1/4”COMBO INPUT1
INPUT1 may accept a MIC or line-level signal via XLR or line-level signal via TRS 1/4”cable.
Be aware of the position of the MIC/LINE switch (3).
(5) XLR AND 1/4”COMBO INPUT2
INPUT2 may accept Hi-Z sources (such as guitars) via the TRS 1/4”input, or line-level signal via XLR.
NEVER connect the output of an amplifier directly to the input of the loudspeaker. This could damage the
input circuitry of the active loudspeaker.
(6) SIGNAL / LIMIT LED-red, indicating ON status.
(7) POWER LED-green, indicating ON status.
(8) RCA INPUTS (Input2 only)
(9) INPUT 1 / MIX Switch (Thru output)
This switch allows you to choose whether only the input1 signal is sent out to the next loudspeaker(switch
out-input1) or mix of the input1 and input2 signals are sent out to the next loudspeaker(switch in-Mix).
(10) Thru output on XLR Connector
This is a male XLR-type connector that produces exactly the same signal that is connected to the main
input jack or a mix of input1 and input2.
(11) Switch for Front LED ON or OFF
(12) SPK Connector to satellite: Use pins + 1 positive / -1 negative
(13) IP Control
(14) AC Power Socket with Main Fuse.
(15) ON-OFF Main Power Switch.
(16) Preset Selector:
4*GS / 8*GS / User (Custom Sound)
4*GS: Allow use this subwoofer with the 4 speaker satellite--Default factory set.
8*GS: Allow use this subwoofer with the 8 speaker satellite--Default factory set.
User: Adjust the Equalization according to the requirement of the user, depending on the acoustics of the
place and the implementation of the system. This setting can be performed by a PC via LAN port, using a
router for internet. This “preset” comes from factory set with the parameters of the
4*GS
, after making the
necessary changes you can be save into the system.
(2)
(5)
(4)
(3)
(14)
(13)
(12)
(15)
(16)
(1)
(6)
(8) (9)
(7)
(10)(11)
- 12 -