Copyright © 2016 FiveFish Audio
NK-72DI Mic DI Assembly Guide
3.10 OPTIONAL: Drill (4) holes on the aluminum sled if you want to use the LED indicator lamps. Position the LEDs so they
are aligned with the drilled holes on your aluminum sled. You can use anywhere from a 1/16” hole up to 1/8” hole size. The
larger the drill size you use, the less critical the alignment of the LED to the hole.
Green LED
Blue LED
Yellow LED
Red LED
NOTE: The LEDs are mounted at the bottom of the PCB.
Smaller sized holes look better as LEDs are not too
overpowering bright when lit up. However, exact alignment is
more critical.
You may need to enlarge the hole on the aluminum sled
for the 1/4” TRS jack.
Summary of Contents for NK-72DI
Page 1: ...FiveFish Studios NK 72DI Mic Preamp DI Kit Assembly Guide Copyright 2016 FiveFish Audio ...
Page 37: ...Copyright 2016 FiveFish Audio NK 72DI Mic Preamp DI Assembly Guide ...
Page 40: ...Copyright 2016 FiveFish Audio NK 72DI Mic Preamp DI Assembly Guide 8 SCHEMATIC DIAGRAM ...
Page 41: ...Copyright 2016 FiveFish Audio NK 72DI Mic Preamp DI Assembly Guide ...
