17
When the treadmill runs out of oil, the screen displays an error message
“system oil run
out
”. Shut off power to the treadmill and replace or refill the oil container.
1.11. Others
•
When countdown parameters are completed, the screen will display END. The
alarm sounds for 0.5s every 2s until the treadmill is fully stopped. The treadmill is
set back to manual mode.
•
When setting parameters, you can cycle through the full range of 5:00-99:00.
When set at 99:00, press to reset it back to 5:00.
•
Countdown time, Countdown cal, Countdown distance: Only one parameter can
be set. In Countdown time time is counted down. In Countdown cal. and
Countdown distance time is counted up until set parameter is reached.
•
Cal. Standard value is 70.3Kcal/Km.
•
When testing body fat, hold the heart rate handles for 5s to display body fat.
•
Switching between kilometers and miles: On standby, or when the safety key is
removed, hold PROG and MODE for 3 seconds at the same time. You will hear
an alarm sound, and your fastest speed will be showed.
•
Removing the safety pin in any mode will rapidly slow the treadmill to a full stop.
The screen displays
“---” and the alarm makes three short sounds. Buttons do not
work when the safety pin is removed.
•
The console will go into standby mode when the safety pin is attached.
Kommenterad [MP1]:
1.Tätät en ymmärrä? Ehkä käsitin
väärin tuon km/h ja mph vaihdon? Sana fastest ei oikein käy
järkeen tässä.