11
System Setting
Print Setting
1. Time Setting: Set the system time.
2. Touch Screen Calibration: when the
touch screen is not sensitive, you can
calibrate it. Try to turn off the unit, press
the screen and turn it on again, the system
will auto-enter the calibration interface.
3. Language Selection: Support 20
languages, including Chinese and English.
5. Restore Factory Setting: Delete all user
data.
1. Reverse: Print from left to right after
opening and print from right to left after
closing.
2. Upside: Printed font will be upside down
after opening.
3. Photoelectric Switch: After receiving the
photoelectric
signal,
wait
for
the
photoelectric delay time (0-9999 ms) and
start printing.
5. Continuous Printing Interval: Range of
0-50000. Actual length is about 6 meters.
6. Continuous Printing Control: the
encoder is turned off regularly.
7. Printing Time: 1-99999 times, 0 for
unlimited printing.
8.Inkjet Concentration: Range of 1-10
and set the number of inkjets at the same
point
11. Encoder: You can choose encoder or
timing inkjet.
