Fitness Wise Holdings Jolly Jumper Assembly Instructions Download Page 2

 

ASSEMBLY INSTRUCTIONS

Attach the clips (attached to 
webbing) to each end of the 
bar. 

  

Clip the spring section onto the 
clamp. 

OUR BEST TO YOU 

We have assembled the best 
components that money can buy 
to make a safe, scientifically 
designed exerciser for the 

'very 

important baby in your life': 

Please follow carefully these - 

IF 

CEILING HOOK USED 

1. 

Pick spot where baby will be free 

to maneuver 3 or 4 feet in all 
directions. 
2. Find ceiling joist by tapping with 
knuckle. Mark spot where hook will 
go - place piece of scotch tape 
over spot to prevent cracking of 
plaster. 
3. Screw hook well into ceiling 
joist. 
4. Test hook with adult weight. 
5. Hang spring up by looping link of 
attached chain over hook. Chain is 
for adjustment. 
6. The location of a joist or other 
heavy material is of the utmost 

IMPORTANCE. 

Do not trust to thin 

wood or wall board. 
7. In summer the jumper can be 
suspended from porch, rotary 
clothesline or sturdy tree in the 
garden. 
8. Be sure to take it along on 
picnics. 
 

DOOR CLAMP 

Another way to use your Jolly 
Jumper is to suspend it from the 
casement of your door with the 
sturdy Door Clamp enclosed with 

your 

Jumper. (see insert No. 1) Be 

sure there is a narrow ledge on 
each side of the door when using 
the clamp. The Clamp can be easily 
put in the over lock position and 
used on trees or rotary clotheslines, 
thus giving the Jumper complete 
portability. 

 

Lay the saddle out flat with the 
striped webbing out to the sides. 

  

Fasten the Jolly Jumper to spring 
(which is already hanging from 
hook or door clamp) by placing 
the palm of your hand under the 
base of the nylon bar and then lift 
baby up to the spring and connect 
the swivel snap to bar. 

Put baby on the saddle and bring 
the lower part of the saddle up 
through the legs. Bring the left then 
right flap over and attach to the 
hook and pile fastening. 
(Make sure this is tight to provide the 
support needed to hold baby 
upright and to keep baby's back 
straight.) 
Bring the flap down over the 
hook and pile fastening and 
dome. 

Adjust the height of the Jolly 
Jumper so that baby's toes just 
touch the floor. Use the chain 
links to adjust height. 
 

WARNING 

It is advisable not to place the 
Jumper near open stairways or 
over concrete floors. Baby should 
not be left unattended. 

 

Attach the clamp to the door 
frame as illustrated. 

 

SAFE 

• 

STURDY 

• 

SUPPORTS 50kgs 

• 

MOVED EASILY 

• 

NO SCREWS OR NAILS 

• 

QUICKLY ATTACHED 

Reviews: