Adjusting the Front Support Tube (B):
1. Pull the Pin (105) out from the Main Frame (A) and swing the Front Support Tube (B) into
one of the following positions:
a.
Position
P1
gives a flat and level seat for working out.
b.
Position
P2
gives an inclined seat for working out.
c.
Position
P3
is for folding up the Bench for storage.
Completely re-insert the Pin (105) into the hole of the bracket on the Main Frame (A) for
the position you select.
Adjusting the Backrest (J):
1. Lift the Rear Support Tube (E) off of tabs that run along the shaft of Main Frame (A)
2. Gently lower the Backrest (J) while holding the Rear Support Tube (E) up and off of the
Main Frame (A).
3. Select a position and rest the Rear Support Tube (E) against the Main Frame (A).
ADJUSTMENT
11
105
