5
Occasionally our products contain components that are pre-lubricated
at the factory. We recommend that you protect flooring, or anything
else the parts may contact with newspaper or cloth.
Before beginning
assembly remove
all parts from the
box. Flip the leg
bar assembly
and place in
position as
shown here.
2 – long feet
4 – short feet
2 – wrenches
2 – 3/8" x 50 bolts
4 – washers
2 – nylon nuts
fastener packs
bag 1
right
cover
left
cover
fastener pack
bag 2
foam roll
pop pin
head
rest
cushion
hand grip
back rest cushion
(body platform)
link bar
resistance
band
resistance
band
pop pin
lift bar frame
leg bar assembly
"U" bracket
head rest
frame
bottom frame
– A
SSEMBLY
I
NSTRUCTIONS –
16
Caring for your Easy Shaper
Your unit has been carefully designed to require minimum maintenance.
To ensure this, we recommend that you do the following:
• Keep your unit clean by wiping sweat, dust or other residue
off with a soft, clean cloth after each use.
• Always check to be sure that the bands are secure and show no signs of wear.
• The Resistance Bands may become white after a few months of usage.
To clean, use a soft, clean cloth with a little dish washing soap.
Do not use water during cleaning.
Storing your Easy Shaper
Your unit conveniently folds down for easy storage. To fold your unit:
– C
ARE &
S
TORAGE –
1
2
3
4
5
Rev. 2/6/04
Rev. 2/6/04
