BEFORE
YOU
BEGIN
8
INTRODUCTION
IMPORT
ANT
PRECAUTIONS
ASSEMBL
Y
BEFORE
YOU
BEGIN
ELLIPTICAL
OPERA
TION
LIMITED
W
ARRANTY
TROUBLESHOOTING
&
MAINTENANCE
CONDITIONING
GUIDELINES
BEFORE YOU
BEGIN
ASSEMBL
Y
INTRODUCTION
IMPORT
ANT
PRECAUTIONS
ELLIPTICAL OPERA
TION
CONDITIONING GUIDELINES
TROUBLESHOOTING &
MAINTENANCE
LIMITED WARRANTY
ASSEMBLY
STEP
TOP CAP
CONSOLE MAST
PRE ATTACHED SCREWS
WATER BOTTLE CAGE
A) Open
HARDWARE BAG FOR STEP 3.
B) Slide the
TOP cAP
over the
cONSOLE MAST.
Attach
WATER BOTTLE cAGE
using
PRE ATTAcHED ScREWS.
C) Attach the
cONSOLE MAST
to the
MAIN FRAME
using
BOLT (A), SPRING WASHER (D)
and
WASHER (B)
from
the front and 2
BOLTS (E),
2
WASHERS (B)
and 2
NUTS (F)
from the side. Make sure to pull the
WIRE
through the
cONSOLE MAST.
D) Snap
TOP cAP
into place.
BOLT (A)
20 mm
Qty: 1
NUT (F)
Qty: 2
BOLT (E)
55 mm
Qty: 2
SPRING WASHER (D)
15 mm
Qty: 1
WASHER (B)
17 mm
Qty: 3
HARDWARE BAG FOR STEP CONTENTS :
MAIN FRAME
CONSOLE MAST
BOLT (A)
BOLTS (E)
WASHERS (B)
NUTS (F)
SPRING WASHER (D)
WASHER (B)
TOP CAP
ASSEMBLY
STEP 2
A) Open
HARDWARE BAG FOR STEP 2.
B) Attach the
REAR WHEEL TRAcKS
to the
MAIN FRAME
using
BOLTS (A)
and
2 WASHERS (B)
from the front
.
Then finish securing the
REAR WHEEL TRAcKS
to the
MAIN FRAME
using
2
BOLTS (D),
2
NUTS (F)
and
2
WASHERS (B)
from the top
.
C) Attach
PEDAL ARM cOVERS
to
PEDAL ARMS
using
ScREWS (c).
BOLT (A)
70 mm
Qty: 2
WASHER (B)
17 mm
Qty: 4
SCREW (C)
Qty: 2
BOLT (D)
55 mm
Qty: 2
NUT (F)
Qty: 2
HARDWARE BAG FOR STEP 2 CONTENTS :
MAIN FRAME
REAR
WHEEL
TRACKS
BOLT (A)
WASHER (B)
PEDAL ARM COVER
SCREW (C)
BOLT (D)
NUTS (F)