Fitmaxx HP12528A, Instruction Manual

Page: 26 / 72

26
34 Nylon nut 1 M10
35 Spring 2
36 Hexagon socket screw 2 M8 x 30 mm
37 Square neck screw 4 M8 x 40 mm
38 Rear crossbar 1
39 Curved washer 6 M8
40 Cap nut 4 M8
41 Crosshead screw 2 ST 5.0 x 20 mm
42 Hexagon socket screw 2 M6 x 50 mm
43 Front crossbar 1
44 Base crossbar 1
45 Open-end wrench for fastening cap nuts 1
46 O-ring 2 P6
47 Screw cover 2 Ø 20 x 8
48 Pipe cover 2
49 Bolt 2 M 8 x 20 mm
Prior to fi rst use
Before using the device for the fi rst time you must:
• Unpack the product contents,
• Insert the batteries in the workout computer,
• Assemble the device.
Unpacking the device
ATTENTION!
❐
Keep children and pets away from the packaging. Danger of suffocation exists!
Unpack all parts and make sure that the product contents are complete (see chapter
“Product Contents and Product Overview”) and check for any damages from transport.
If you identify damages to the components, do not use them (!), instead contact our cus-
tomer service centre.
Inserting/changing the battery
You will need a 1.5 volt battery, type AA to operate the workout computer.
1. Open the battery compartment on the back of the workout computer.
2. Insert the battery. When inserting a battery, make sure the polarity is correct (+/-).
3. Change the battery as soon as the display begins to diminish.