(
-
)
Gray Wire
Red Wire
T
an Wire
Ground
Coolant T
emperature
Sensor
Handheld Controller
O
2
Sensor
Batter
y
Ignition Switch
Fuel Pump
Electric Fan
Ready-to-Run Distributor
Coil
Note:
Most ready-to-run distributors will
have a 3-wire harness. If it has 2-wires, such as a Pertronix, a separate ground
wire will not be present.
Main Wiring Harness
Orange Wire
Connections for Summit EFI System with Ready-T
o-Run Distributor
Selecting
the
correct
wiring
schematic:
Review
Figures
1
8
through
2
0
and
select the
schematic
that
suits
your
particular
application.
Figure
1
8
shows
how
to
connect a ready-to-run distributor. Figure
19
is for an HEI distributor. Figure 2
0
is for a
system with an external CDI box. One of these configurations will suit your vehicle.
Figure 18
8
(+)
Fuel Injection
GO EFI
Classic
FiTech
