When beaconing is turned on the device will attempt to transmit step data to a receiving station
within range. You can set how often the device will do this on the Fitbug app.
Memory Mode
The Memory Mode is displayed on the Fitbug app. You can send up to 14-days of steps and calories
burned to Fitbug app. Tap on the
History
tab of the Fitbug app to view all your aerobic steps and
total steps.
To reset records:
You cannot reset the records manually. The pedometer is designed to automatically reset the
records.
Data Transfer
To help users keep track of the results, all the measurements recorded by the
FB929
are uploaded to
the Fitbug app and network for viewing and analysis.
There are three ways to send data from the
FB929
:
On-demand Mode
Click the button once so the light goes green, which indicates the data has been pushed to the app.
The light will switch off once all the data has been sent.
Stream Mode
Click the button twice and the green light will blink every five seconds to indicate that the steps are
being streamed in real-time to the Fitbug app.
Beacon Mode
Sends steps to your app at regular intervals (every 15, 30, 45 minutes). Select
Beacon Mode
on the
Device Setup
page after choosing the Orb from the paired devices list on Devices page.
Sleep Mode
Click three times on the button, the green light will blink every second for five seconds to indicate
sleep mode is on. Please use inserted into the wristband and wear on your wrist. Turn
Sleep Mode
off when you wake up by pushing the button and holding until the green light blinks every second
for five seconds.
Note:
Sleep Mode
will turn off automatically once it has registered that you have walked 50 steps.
Refer to
https://www.fitbug.com/setup/orb
Important
There is a 14-day limit for memory. To prevent records being erased before being uploaded to the
network, users are reminded to send data every few days.
