Fit4Home MAXX1 TF-7005A, User Manual

Page: 9 / 26

9
STEP 2
1. The two guide rods (A6) are
inserted into the transverse
bottom tube (A2) through the
protective net cover frame.
Use two rubber washer (E4)
washer (B17) bolts (B5) and
nuts (B13).
2. The counterweight block
(E23) penetrates into the
guide rod (A6).
3. The weight selection
lever (A5) inserted into
the counterweight block
(E23). and then install the
positioning sleeve (E9) pin
(C3) and counterweight top
block (E22).
4. The protective net cover
frame (D4) penetrates into
the guide rod (A6).Then fix the
locating ring (E5).
ASSEMBLY INSTRUCTIONS