Fit4Home F4H-EB-ORB2600S, User Manual, Page: 7 / 18

7
ASSEMBLY INSTRUCTIONS
STEP 1
Attach the Front Stabilizer (NO.7) and
the Rear Stabilizer(N0.2) with four sets
of Carriage Bolts(NO.4), Washers(NO.6)
and Domed Nuts(NO.5). N.B. The Front
Stabilizer has the integral transport
wheels
STEP 2
Then insert a Pedal Hinge Bolt (NO.15)
and put the arc washer (NO.36) through
the Pedal Post (NO.11 for the right side,
NO.12 for the left). Put a Spring Washer
(NO.18) on the bolt, then pass it through
the Crank (NO.25), and secure the bolt
with an M12 Nut (NO.17). Repeat this
procedure for the left side.
In order to install the hinge bolt properly,
keep it perfectly straight as the bolt
goes through the pedal tubing and
the crankshaft. If the hinge bolt is
connected to the crankshaft at an angle,
damage to both the hinge bolt and the
crankshaft may occur.