INSTRUCTION MANUAL
TPMS FIT
8
TROUBLESHOOTING, FAULT CLEARANCE AND REPAIR
8.1
TROUBLESHOOTING AND FAULT CLEARANCE
8.1.1
TYRE PRESSURE IS NOT DISPLAYED
The tyre pressure sensors switch to a power-saving mode if the e-bike is not being moved. For this reason, you must
move the e-bike first until the tyre pressure is displayed (rotate wheel 180°).
8.1.2
ERROR TABLE
Error code
Displayed error message
Action / Limitation
23-xx
Pressure sensor error
Sensor may need to be replaced. Contact your
specialist dealer.
23-09
Low battery in front pressure
sensor (left)
Sensor needs to be replaced. Contact your specialist
dealer.
23-0A
Low battery in rear pressure
sensor (left)
Sensor needs to be replaced. Contact your specialist
dealer.
23-08
Low battery in front pressure
sensor (right)
Sensor needs to be replaced. Contact your specialist
dealer.
23-0C
Low battery in rear pressure
sensor (right)
Sensor needs to be replaced. Contact your specialist
dealer.
8.2
REPAIR
Special expertise and tools are required for many repairs. That is why only a specialist dealer may perform repairs.
8.2.1
ORIGINAL PARTS
The individual e-bike parts have been carefully selected and matched to one other. Only original parts may be used
for maintenance and repair. Observe the operating instructions for the new components.
FIT_Manual_Wheel_set_Tire_pressure_sensor_V1_en | Version 01 | 19.08.2022
27
