Digital Door Lock
4) Fold the installation paper by 90 degrees as per the direction of the door.
5) After putting the hole of installation paper on the mortise, fix the position of the hole by placing the two of
7
Ø
stick, then tape the installation paper on the door frame. According to the installation paper, mark the
center of hole with the nail or pen.
6) Mark the center of hole on the outer door
with the same installation paper.
7) Unscrew the mortise and drill a hole
according to the marks.
8) Fix the mortise on the door and tighten it
with the screws.
9) Install the door lock.
10) Check the direction of mortise (Left, Right)
-
The default is for the left handed
-
To change it to the right handed, press “Open/Close” button for 5 seconds, then press 6 twice and
press
