8
Front Panel Controls (cont.)
11. 10dB Pad –
If you have a high output pickup and the Clip LED comes
on at low Gain settings, push this switch in for a more usable range.
12. XLR Mic Input –
You may also connect an outboard preamp with
balanced XLR out to this input.
13. 1/4” Instrument Input –
Accepts all types of passive or active acoustic
pickups.
Note: If you attempt to plug in both the XLR and 1/4-inch inputs at the
same time, the XLR shuts off.
14. Aux In –
Use this to control the level of a device plugged into the Aux
Input. Note that the Aux channel is independent of the Mute switch, so
you can play pre-recorded music on your breaks.
15. Monitor –
Use this to control the level of the device you plug into the
Monitor Input. See page 16 on Monitor input applications.
16. Reverb (Select) –
Press the Reverb button to select among four preset
reverb effects.
17. Phantom Power –
Provides 48V to the XLR input for use with a
condenser Microphone. The Phantom LED will light to indicate 48V is
being supplied to the XLR jack.
For more information on Phantom Power, see page 17.
Summary of Contents for SoloAmp
Page 1: ...USER GUIDE SOLOAMPTM www shman com...
Page 7: ...7 1 3 5 6 8 10 4 2 7 9...
Page 9: ...9 11 12 13 14 16 17 15...