9
Stereo Operation
A small switch, located on the side of the preamp, let’s you choose between
mono and stereo operation. Factory preset to mono, you use the onboard
controls to affect your mic and pickup sound and connect to your amplifi er or PA
with a standard guitar cable
If you wish to split the pickup and microphone signals for separate external
processing, move this switch to stereo and connect to your amplifi er or PA with a
stereo “Y” cable. In this mode, the pickup signal goes to the tip output and the
microphone goes to the ring output.
Mono / Stereo switch
MONO CABLE
Microphone & Pickup
Signals
STEREO "Y" CABLE
Tip
Pickup
Ring
Microphone
