- 8 -
Classical Style Control Modules
For nylon string guitars, or steel string guitars with
unique bracing patterns, remove the top cover of the
Volume & Tone module and the Blend module and
replace them with the alternate supplied classical
covers.
To convert the steel string mounts to classical mounts,
remove the adhesive on the cover to expose the small
Philips head screw. Remove and place the screw aside as
you will need it to attach the classical cover.
On the back end of the module, remove the 1.5mm hex
screw and place it aside as you will need this screw to
attach the classical cover.
Remove the steel string cover(s) and replace it with the
classical cover(s) using the original Philips and 1.5mm
screws. After both screws are in place, the control
module(s) are ready to install into the guitar. Return to
Volume & Tone Module Installation
on page 6