PREPARING YOUR INSTRUMENT FOR THE POWERBLEND
Before you begin using your Powerblend, you need to have the magnetic and
Powerbridge pickups in place on your guitar.
Wire the guitar to a stereo output jack as follows:
1. Route the magnetic pickups' signal to the TIP terminal.
2. Route the magnetic pickups' ground to the SLEEVE terminal.
3. Route the Powerbridge signal to the RING terminal.
4. Route the Powerbridge ground to the SLEEVE terminal.
NOTE: If you decide to wire the
Powerbridge directly to the output jack
without a volume control, you must wire a 5
M
Ω
resistor between the Ring and Sleeve
terminals on the instrument's output jack.
MAGNETIC
VOLUME
SLEEVE
POWERBRIDGE
VOLUME
(OPTIONAL)
POWERBRIDGE
RING
TIP
330 pF
5 M
Ω
1
2
3
MAGNETIC
SIGNAL
STEREO JACK
MAGNETIC
VOLUME
POWERBRIDGE
MAGNETIC
SIGNAL
SLEEVE
RING
5 M
Resistor
Ω
TIP
STEREO JACK
P o w e r b l e n d
4
