PAT. 8,519,251
Rev3.1
Bridge
Neck
Coil Tap Mode Select
BASS-SB1
GND
V
oice-2
Coil T
ap
V2 MC Of
f
+9-18V
GND
OUTPUT
4-String Bridge
4-String Neck
5-String Bridge
5-String Neck
1
2
3
4
5
6
Fluence Bass – Connection Points & Functions
1. Mid Flat - This feature bypasses the mid contour on Voice 2, and
works in both Humbucking and Single Coil mode.
To activate, connect the Mid Flat wire to ground, either wired
through a switch or permanently to a ground source within the cavity.
2. Voice-2 Select Wire - To select Voice-2, connect this pin to ground
through a switch contact or permanently by soldering it to any
ground or by using one of the included jumpers across the pins.
This pin is an electronically controlled switch and has no signal on
it. It can share a switch contact with other voice select wires without
interaction.
6
Summary of Contents for FLUENCE SB1
Page 1: ...INSTALLATION GUIDE FLUENCE BASS SOAPBAR PICKUPS...
Page 9: ...9...
