background image

9

While the 

Anti-Feedback

 control is very effective, it’s best if you spend some 

time while setting up before a performance and catch any issues before you 
begin to play. With some practice, you’ll fi nd you can also use it to “fi x” any 
resonant notes that may stand out in a particular venue.

Using the automatic 

Anti-Feedback

 control:

1. 

Press + hold

 both Edit and Volume

 for 2 seconds. The tuner display will fl ash 

a “

1

” to indicate it is searching for the fi rst feedback.

2. Turn up the 

Volume

, then either dampen the strings while tapping the body or 

play the troublesome note until the feedback begins. The fi lter will automatically 

identify and eliminate the feedback. The “

1

” in the display will now light solid.

3. At this point, you may continue to turn up your 

Volume

 as in step 2 to identify 

up to two more problematic resonances. Each is indicated via a fl ashing “

2

” or 

3

” during the search, in turn lighting solid when the resonance has been 

identifi ed.

4. You may press the 

Volume 

knob at any time to cancel the search. The circuit 

will hold the notched frequenc(ies) in memory until the process is repeated.

Summary of Contents for F1 AURA+





















Reviews: